您好，歡迎訪問蘇州賽浦斯電子有限公司官網
咨詢熱線
0512-66324802
產品中心
TV-1500-ELITE-220
0.00
0.00
tweezer-vac精英開發顧客因擔心牢牢把握關鍵部件，他們不會放棄因真空泄漏。這種真空鑷子使用一個集成的十段條形圖顯示明顯的顯示在操作真空度。條形圖將顯示最小真空壓力直到零件被抓住，然后當一個部件被抓住時，條形圖顯示真空部分顯示在被處理的零件上。此外，真空端口集成了用戶可更換的入口過濾器，保護工具免受灰塵顆粒的影響。這種真空鑷子在取決于你的應用可以處理各種試劑盒。工具包可在110或220伏操作。
這個ESD安全套件包括：
5 feet of coiled vacuum hose
一套九個真空提示。
五個真空尖端保持器頂部的工具。
真空手柄。
條形圖上電功率和真空度指示器。
橡膠防滑腳。
ESD接地是三線電源線。
產生高達十英寸汞柱的真空。
可選：元件釋放腳開關
The TWEEZER-VAC ELITE was developed as a result of customer concerns about firmly grasping critical components and not dropping them due to a vacuum leak. This vacuum tweezer uses an integrated ten segment bar-graph-display visibly shows the vacuum level present during operation. The bar graph will show minimum vacuum pressure until a part is grasped and then when a part is grasped the bar graph displays the vacuum level presented to the part being handled. Additionally, the vacuum port integrates a user replaceable inlet filter that protects operation of the tool from dust particles. This Vacuum Tweezer is available in various kits depending on your handling application. Kits are available in 110 or 220 volt operation.
This ESD safe Kit Includes:
5 feet of coiled vacuum hose
A set of nine vacuum tips.
Five vacuum tip holders on top of tool.
A vacuum pick-up handle.
Bar graph power-on and vacuum-level indicator.
Rubber no-skid feet.
ESD ground connection is by three wire power cord.
Produces vacuum of up to ten inches of mercury.
Optional: Foot switch for component release
這個ESD安全套件包括：
5 feet of coiled vacuum hose
一套九個真空提示。
五個真空尖端保持器頂部的工具。
真空手柄。
條形圖上電功率和真空度指示器。
橡膠防滑腳。
ESD接地是三線電源線。
產生高達十英寸汞柱的真空。
可選：元件釋放腳開關
The TWEEZER-VAC ELITE was developed as a result of customer concerns about firmly grasping critical components and not dropping them due to a vacuum leak. This vacuum tweezer uses an integrated ten segment bar-graph-display visibly shows the vacuum level present during operation. The bar graph will show minimum vacuum pressure until a part is grasped and then when a part is grasped the bar graph displays the vacuum level presented to the part being handled. Additionally, the vacuum port integrates a user replaceable inlet filter that protects operation of the tool from dust particles. This Vacuum Tweezer is available in various kits depending on your handling application. Kits are available in 110 or 220 volt operation.
This ESD safe Kit Includes:
5 feet of coiled vacuum hose
A set of nine vacuum tips.
Five vacuum tip holders on top of tool.
A vacuum pick-up handle.
Bar graph power-on and vacuum-level indicator.
Rubber no-skid feet.
ESD ground connection is by three wire power cord.
Produces vacuum of up to ten inches of mercury.
Optional: Foot switch for component release