WVE9000-MW6 6寸可調節
The WAFER-VAC? ELITE was developed as a result of customer concerns about firmly grasping critical components and not dropping them due to a vacuum leak. This VACUUM TWEEZER? uses an integrated ten segment bar-graph-display visibly shows the vacuum level present during operation. The bar graph will show minimum vacuum pressure until a part is grasped and then when a part is grasped the bar graph displays the vacuum level presented to the part being handled. Additionally, the vacuum port integrates a user replaceable inlet filter that protects operation of the tool from dust particles. This VACUUM TWEEZER? is available in various kits depending on your handling application.
NOTE: This item will not function properly without filter, see below for replacement intake filters (VF-40M-5). NOTE: Other Molded PEEK? Wafer Tip sizes available.
These ESD-SAFE kits feature:
Dimensions 8” X 3” X 3.5” (203mm X 76mm X 89mm).
Bar graph power-on and vacuum-level indicator.
Class 100 Cleanroom Safe.
Whisper-quiet operation.
Long-life pump.
Side mounted handle holder.
Rubber no-skid feet.
ESD ground connection is by three wire power cord.
Produces vacuum of up to ten inches of mercury.
Replaceable inlet filter.
This kit includes:
COILED-VACUUM-HOSE-6 (VCH-2.5MM-6-BLK)
PUSH-BUTTON-WAFER-PEN (VWP-500-2.5MM)
Molded PEEK? WAFER TIP (VMWT-B)
3 WIRE POWER CORD
威發-Vac?Elite的開發是由于客戶擔心牢牢抓住關鍵部件，而不是因?yàn)檎婵招孤┒袈洹４苏婵砧囎?使用集成的十段條形圖顯示，可明顯顯示操作過程中的真空水平。條形圖將顯示最小真空壓力，直到抓住一個零件，然后當抓住一個零件時，條形圖將顯示所處理零件的真空水平。此外，真空端口集成了一個用戶可更換的入口過濾器，保護工具的操作不受灰塵顆粒的影響。此真空鑷子可根據您的操作應用提供各種套件。
注意：如果沒有濾清器，此項將無法正常工作，請參閱下面的“更換進氣濾清器”（VF-40M-5）。注：可提供其他成型的Peek?晶片頭尺寸。
這些ESD-SAFE套件具有：
尺寸8“x 3”x 3.5“（203mm x 76mm x 89mm）。
條形圖通電和真空液位指示器。
100級潔凈室保險箱。
小聲安靜地操作。
長壽命泵。
側裝把手支架。
橡膠防滑腳。
ESD接地采用三線電源線連接。
產生高達10英寸汞的真空。
可更換進口過濾器。
該套件包括：
盤繞式真空軟管-6（VCH-2.5mm-6-BLK）
按鈕式圓珠筆（VWP-500-2.5mm）
成型PEEK?晶片頭（VMWT-B）
3線電源線
The WAFER-VAC? ELITE was developed as a result of customer concerns about firmly grasping critical components and not dropping them due to a vacuum leak. This VACUUM TWEEZER? uses an integrated ten segment bar-graph-display visibly shows the vacuum level present during operation. The bar graph will show minimum vacuum pressure until a part is grasped and then when a part is grasped the bar graph displays the vacuum level presented to the part being handled. Additionally, the vacuum port integrates a user replaceable inlet filter that protects operation of the tool from dust particles. This VACUUM TWEEZER? is available in various kits depending on your handling application.
NOTE: This item will not function properly without filter, see below for replacement intake filters (VF-40M-5). NOTE: Other Molded PEEK? Wafer Tip sizes available.
These ESD-SAFE kits feature:
Dimensions 8” X 3” X 3.5” (203mm X 76mm X 89mm).
Bar graph power-on and vacuum-level indicator.
Class 100 Cleanroom Safe.
Whisper-quiet operation.
Long-life pump.
Side mounted handle holder.
Rubber no-skid feet.
ESD ground connection is by three wire power cord.
Produces vacuum of up to ten inches of mercury.
Replaceable inlet filter.
This kit includes:
COILED-VACUUM-HOSE-6 (VCH-2.5MM-6-BLK)
PUSH-BUTTON-WAFER-PEN (VWP-500-2.5MM)
Molded PEEK? WAFER TIP (VMWT-B)
3 WIRE POWER CORD
威發-Vac?Elite的開發是由于客戶擔心牢牢抓住關鍵部件，而不是因?yàn)檎婵招孤┒袈?。此真空鑷?使用集成的十段條形圖顯示，可明顯顯示操作過程中的真空水平。條形圖將顯示最小真空壓力，直到抓住一個零件，然后當抓住一個零件時，條形圖將顯示所處理零件的真空水平。此外，真空端口集成了一個用戶可更換的入口過濾器，保護工具的操作不受灰塵顆粒的影響。此真空鑷子可根據您的操作應用提供各種套件。
注意：如果沒有濾清器，此項將無法正常工作，請參閱下面的“更換進氣濾清器”（VF-40M-5）。注：可提供其他成型的Peek?晶片頭尺寸。
這些ESD-SAFE套件具有：
尺寸8“x 3”x 3.5“（203mm x 76mm x 89mm）。
條形圖通電和真空液位指示器。
100級潔凈室保險箱。
小聲安靜地操作。
長壽命泵。
側裝把手支架。
橡膠防滑腳。
ESD接地采用三線電源線連接。
產生高達10英寸汞的真空。
可更換進口過濾器。
該套件包括：
盤繞式真空軟管-6（VCH-2.5mm-6-BLK）
按鈕式圓珠筆（VWP-500-2.5mm）
成型PEEK?晶片頭（VMWT-B）
3線電源線