VVSV-NO-KIT 內置真空 常開
The STEALTH-VAC operates directly on 30 to 70 psi FILTERED compressed air or nitrogen. The vacuum is normally ON. The compressed-air-powered tools are our most powerful vacuum tweezer tools. The vacuum level can be controlled by adjusting the input pressure. At 70 psi input the vacuum level is 20 InHg with 4 lpm of free air flow, at 30 psi input the vacuum level is 10 InHg with 3 lpm of free air flow and at 10 psi input the vacuum level is 2 InHg with 1 lpm of free air flow.
The normally open Stealth Vac Kit is supplied with a set of nine vacuum tips #VCS-9-B, 6 feet of 1/16 inch air hose, a 1/8 NPT to 1/16" barb adaptor for the supply line, the vacuum generating handle and a VMB-3 holder for the wand. The Stealth-Vac vacuum pen contains a whisper quiet venturi vacuum generator. With FILTERED compressed air supplied at the rear of the tool, the pickup tip has constant vacuum available.
To handle a part:
1. Attach a vacuum tweezer tip slightly smaller than the part you need to handle.
2. Merely touch the vacuum tip squarely to the part. The part is now grasped.
3. Move the part to where you want it. Tap the control button to release the part.
STIALTH-VAC直接在30至70 PSI過濾的壓縮空氣或氮氣上運行。真空常開。壓縮空氣動力工具是我們最強大的真空鉗工具。真空度可通過調節輸入壓力來控制。在70psi輸入時，真空度為20InHg，自由空氣流量為4lpm；在30psi輸入時，真空度為10InHg，自由空氣流量為3lpm；在10psi輸入時，真空度為2InHg，自由空氣流量為1lpm。
通常打開的隱形真空套件配有一套九個真空尖端#VCS-9-B、6英尺1/16英寸空氣軟管、1/8NPT至1/16英寸的倒鉤適配器、真空產生手柄和VMB-3魔杖支架。隱形VAC真空筆包含一個耳語安靜文丘里真空發生器。利用過濾后的壓縮空氣在工具的后部提供，拾取頭具有恒定的真空可用性。
處理一部分：
1。安裝一個真空鑷子尖端比你需要處理的部分稍小。
2。只需將真空尖端直接接觸到零件即可。這個部分現在已經掌握了。
三。把零件移到你想要的地方。點擊控制按鈕釋放零件。
The STEALTH-VAC operates directly on 30 to 70 psi FILTERED compressed air or nitrogen. The vacuum is normally ON. The compressed-air-powered tools are our most powerful vacuum tweezer tools. The vacuum level can be controlled by adjusting the input pressure. At 70 psi input the vacuum level is 20 InHg with 4 lpm of free air flow, at 30 psi input the vacuum level is 10 InHg with 3 lpm of free air flow and at 10 psi input the vacuum level is 2 InHg with 1 lpm of free air flow.
The normally open Stealth Vac Kit is supplied with a set of nine vacuum tips #VCS-9-B, 6 feet of 1/16 inch air hose, a 1/8 NPT to 1/16" barb adaptor for the supply line, the vacuum generating handle and a VMB-3 holder for the wand. The Stealth-Vac vacuum pen contains a whisper quiet venturi vacuum generator. With FILTERED compressed air supplied at the rear of the tool, the pickup tip has constant vacuum available.
To handle a part:
1. Attach a vacuum tweezer tip slightly smaller than the part you need to handle.
2. Merely touch the vacuum tip squarely to the part. The part is now grasped.
3. Move the part to where you want it. Tap the control button to release the part.
STIALTH-VAC直接在30至70 PSI過濾的壓縮空氣或氮氣上運行。真空常開。壓縮空氣動力工具是我們最強大的真空鉗工具。真空度可通過調節輸入壓力來控制。在70psi輸入時，真空度為20InHg，自由空氣流量為4lpm；在30psi輸入時，真空度為10InHg，自由空氣流量為3lpm；在10psi輸入時，真空度為2InHg，自由空氣流量為1lpm。
通常打開的隱形真空套件配有一套九個真空尖端#VCS-9-B、6英尺1/16英寸空氣軟管、1/8NPT至1/16英寸的倒鉤適配器、真空產生手柄和VMB-3魔杖支架。隱形VAC真空筆包含一個耳語安靜文丘里真空發生器。利用過濾后的壓縮空氣在工具的后部提供，拾取頭具有恒定的真空可用性。
處理一部分：
1。安裝一個真空鑷子尖端比你需要處理的部分稍小。
2。只需將真空尖端直接接觸到零件即可。這個部分現在已經掌握了。
三。把零件移到你想要的地方。點擊控制按鈕釋放零件。