VVSV-NC-X 內置真空 常閉
The STEALTH-VAC ELITE operates directly on 30 to 50 psi FILTERED compressed air or nitrogen. The normally closed Stealth-Vac Elite vacuum pen contains a whisper quiet venturi vacuum generator that is activated only when the control button is depressed. This helps conserve factory compressed air when the tool is not in use. The vacuum level can be controlled by adjusting the input pressure. At 50 psi input the vacuum level is 21 InHg with 2 lpm of free air flow, at 30 psi input the vacuum level is 18 InHg with 1.75 lpm of free air flow and at 10 psi input the vacuum level is 3 InHg with .75 lpm of free air flow.
This kit includes 6 feet of 1/16” coiled air hose, a 1/8” NPT to 1/16” barb adapter for the supply line and the vacuum generating handle. With FILTERED compressed air supplied at the rear of the tool it is ready for use as follows:
1. Attach a vacuum tweezer tip slightly smaller than the part you need to handle.
2. Touch the vacuum tip squarely to the part and depress and hold the button. The part is now grasped.
3. Move the part to where you want it. Release the control button to release the part.
Stualth-VAC精英直接運行在30至50磅/平方英寸-4-5KG的過濾壓縮空氣或氮氣。通常關閉的隱形真空精英真空筆包含一個靜音文丘里真空發生器，只有當控制按鈕被按下時才激活。這有助于在不使用工具時節約工廠壓縮空氣。真空度可通過調節輸入壓力來控制。在50psi輸入時，真空度為21InHg，自由空氣流量為2lpm；在30psi輸入時，真空度為18InHg，自由空氣流量為1.75lpm；在10psi輸入時，真空度為3InHg，自由空氣流量為0.75lpm。
這個套件包括6英尺1/16英寸的卷繞式空氣軟管，1/8“NPT-1/16”的供應線倒鉤適配器和真空產生手柄。當過濾后的壓縮空氣在工具的后部提供時，可以使用如下：
1。安裝一個真空鑷子尖端比你需要處理的部分稍小。
2。將真空尖端直接接觸到零件并按下并按住按鈕。這個部分現在已經掌握了。
三。把零件移到你想要的地方。釋放控制按鈕釋放零件。
The STEALTH-VAC ELITE operates directly on 30 to 50 psi FILTERED compressed air or nitrogen. The normally closed Stealth-Vac Elite vacuum pen contains a whisper quiet venturi vacuum generator that is activated only when the control button is depressed. This helps conserve factory compressed air when the tool is not in use. The vacuum level can be controlled by adjusting the input pressure. At 50 psi input the vacuum level is 21 InHg with 2 lpm of free air flow, at 30 psi input the vacuum level is 18 InHg with 1.75 lpm of free air flow and at 10 psi input the vacuum level is 3 InHg with .75 lpm of free air flow.
This kit includes 6 feet of 1/16” coiled air hose, a 1/8” NPT to 1/16” barb adapter for the supply line and the vacuum generating handle. With FILTERED compressed air supplied at the rear of the tool it is ready for use as follows:
1. Attach a vacuum tweezer tip slightly smaller than the part you need to handle.
2. Touch the vacuum tip squarely to the part and depress and hold the button. The part is now grasped.
3. Move the part to where you want it. Release the control button to release the part.
Stualth-VAC精英直接運行在30至50磅/平方英寸-4-5KG的過濾壓縮空氣或氮氣。通常關閉的隱形真空精英真空筆包含一個靜音文丘里真空發生器，只有當控制按鈕被按下時才激活。這有助于在不使用工具時節約工廠壓縮空氣。真空度可通過調節輸入壓力來控制。在50psi輸入時，真空度為21InHg，自由空氣流量為2lpm；在30psi輸入時，真空度為18InHg，自由空氣流量為1.75lpm；在10psi輸入時，真空度為3InHg，自由空氣流量為0.75lpm。
這個套件包括6英尺1/16英寸的卷繞式空氣軟管，1/8“NPT-1/16”的供應線倒鉤適配器和真空產生手柄。當過濾后的壓縮空氣在工具的后部提供時，可以使用如下：
1。安裝一個真空鑷子尖端比你需要處理的部分稍小。
2。將真空尖端直接接觸到零件并按下并按住按鈕。這個部分現在已經掌握了。
三。把零件移到你想要的地方。釋放控制按鈕釋放零件。